郑士建，工学博士
河北工业大学材料科学与工程学院教授、博士生导师
材料科学与工程学院院长
河北工业大学先进材料测试与分析中心主任
1980年出生于河北省徐水县
2014年入选 中国科学院“百人计划”
2016 中国电子显微镜学会理事；
2016 中国材料研究学会青年工作委员会理事；
2016 中国电子显微镜学会原位电子显微学方法专业委员会副主任；
2019 年获河北省政府特殊津贴。
研究领域：电子显微学，金属结构材料，能源材料
关键词：透射电镜，力学性能，辐照损伤，电化学，界面，位错，孪晶
联系方式
电话：13654039173
E-mail：sjzheng@hebut.edu.cn
教育和工作经历
1999.09-2003.07 河北工业大学，材料科学与工程学院，学士；
2003.09-2009.06 中国科学院金属研究所，固体原子像研究部，博士；
2009.09-2011.05 日本精细陶瓷研究中心，博士后；
2011.06-2014.09 美国洛斯阿拉莫斯国家实验室，博士后；
2014.09-2019.01 中国科学院金属研究所，沈阳材料科学国家（联合）实验室，固体原子像研究部，研究员；
2016.04-2019.01 中国科学院金属研究所/中国科学技术大学材料科学与工程学院，博士生导师；
2019.01-至今 河北工业大学，材料科学与工程学院，教授/博导
研究方向：原子尺度结构与材料性能关系的（原位）透射电子显微学研究，尤其关注材料中界面结构对材料性能的影响，材料体系包含块体纳米层状金属材料，TWIP钢，高熵合金，高温合金、钛合金、镁合金、二维材料、锂离子电池材料等。
主要成果：揭示了纳米颗粒MnCr2O4与MnS界面诱发的不锈钢点蚀形核新机制；建立了块体纳米多层金属复合材料界面结构特性与材料织构演化、变形机理、热稳定性、抗核辐照损伤性能之间的基本关联；揭示了锂离子电池材料在循环充放电过程中的晶界结构演化规律及其与电池容量下降之间的因果关系。已发表Nature、Nature Communications、Science Advances、PNAS、Advanced Materials、Acta Materialia（14篇）等论文130篇，引用5000多次，H因子38。
科研项目：国家自然科学基金青年项目（51401208），国家自然科学基金面上项目（51771201，52071124），沈阳材料科学国家（联合）实验室基础前沿及共性关键技术创新项目（2015RP18）， 中国科学院“百人计划”项目；中组部项目等。
获奖（荣誉）情况
2022 河北省最美科技工作者
2022 天津市优秀科技工作者
2019 河北省政府特殊津贴
2016 辽宁省百千万工程；
2014 中国科学院沈阳分院优秀青年科技人才奖；
2013美国洛斯阿拉莫斯国家实验室优秀博士后（3/400）；
2011日本陶瓷协会最佳图片奖；
已发表学术论文目录[1-130]
[1] Y. Zhou, X. Shao, S. Zheng, X.J.J.o.M.S. Ma, Technology. Structure evolution of the Fe3C/Fe interface mediated by cementite decomposition in cold-deformed pearlitic steel wires, 101 (2022) 28-36.
[2] Z. Yan, Z. Liu, X. Kong, B. Yao, Q. An, S. Jiang, R. Zhang, I.J. Beyerlein, S. Zheng. Effect of void morphology on void facilitated plasticity in irradiated Cu/Nb metallic nanolayered composites, Journal of Nuclear Materials 558 (2022) 153380.
[3] H. Su, X. Zhou, S. Zheng, H. Ye, Z. Yang. Dislocation facilitated formation and evolution of basal-prismatic/prismatic-basal interfaces in a Mg alloy, Scripta Materialia 206 (2022) 114237.
[4] J.C. Pang, W.F. Yang, G.D. Wang, S.J. Zheng, R.D.K. Misra, H.L. Yi. Divorced eutectoid transformation in high-Al added steels due to heterogenous nucleation of kappa-carbide, Scripta Materialia 209 (2022).
[5] 郑士建，刘正，郑晓东，马英杰. 片层Ti-6Al-4V合金的界面结构及性能, 河北工业大学学报 50 (2021).
[6] L. Zhu, X. Zhang, M. Li, X. Shang, K. Lei, B. Zhang, C. Chen, S. Zheng, H. Song, J. Chen. Trap State Passivation by Rational Ligand Molecule Engineering toward Efficient and Stable Perovskite Solar Cells Exceeding 23% Efficiency, Advanced Energy Materials 11 (2021).
[7] L. Zhu, X. Shang, K. Lei, C. Wu, S. Zheng, C. Chen, H. Song. Doping in Semiconductor Oxides-Based Electron Transport Materials for Perovskite Solar Cells Application, Solar Rrl 5 (2021).
[8] S.S. Youssef, X. Zheng, M. Qi, Y. Ma, S. Huang, J. Qiu, S. Zheng, J. Lei, R. Yang. Effects of Al content and alpha(2) precipitation on the fatigue crack growth behaviors of binary Ti-Al alloys, Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process. 819 (2021).
[9] S.S. Youssef, X. Zheng, Y. Ma, S. Huang, M. Qi, J. Qiu, R. Zhang, P. Hua, S. Zheng, J. Lei, R. Yang. Characterization of alpha(2) Precipitates in Ti-6Al and Ti-8Al Binary Alloys: A Comparative Investigation, Acta Metallurgica Sinica-English Letters 34 (2021) 710-718.
[10] S.S. Youssef, X. Zheng, S. Huang, Y. Ma, M. Qi, S. Zheng, J. Lei, R. Yang. Precipitation behavior of alpha(2) phase and its influence on mechanical properties of binary Ti-8Al alloy, Journal of Alloys and Compounds 871 (2021).
[11] H. Yao, X. Zou, S. Zheng, Y. Hu, S. Zhang, C. Liang, H. Zhou, D. Wang, H. Wang, L. Yang, Q. Li. Femtosecond laser-induced nanoporous layer for enhanced osteogenesis of titanium implants, Materials Science & Engineering C-Materials for Biological Applications 127 (2021).
[12] W. Yang, M. Gong, J. Yao, J. Wang, S. Zheng, X. Ma. Hardening induced by dislocation core spreading at disordered interface in Cu/Nb multilayers, Scripta Materialia 200 (2021) 113917.
[13] L. Yang, X. Ma, X. Shang, D. Gao, C. Wang, M. Li, C. Chen, B. Zhang, S. Xu, S. Zheng, H. Song. Zwitterionic Ionic Liquid Confer Defect Tolerance, High Conductivity, and Hydrophobicity toward Efficient Perovskite Solar Cells Exceeding 22% Efficiency, Solar Rrl 5 (2021).
[14] T. Xiong, W. Yang, S. Zheng, Z. Liu, Y. Lu, R. Zhang, Y. Zhou, X. Shao, B. Zhang, J. Wang, F. Yin, P.K. Liaw, X. Ma. Faceted Kurdjumov-Sachs interface-induced slip continuity in the eutectic high-entropy alloy, AlCoCrFeNi2.1, J. Mater. Sci. Technol. 65 (2021) 216-227.
[15] S. Wei, Z. Zhao, S. Zheng, H. Wei, J. Wang. Fatigue-induced interface damage in Cu/V nanoscale metallic multilayers, Scripta Materialia 190 (2021) 103-107.
[16] L. Wang, X. Liu, C. Li, M. Yang, B. Wang, K. Ming, S. Zheng, J. Liang, Y.J.A.P.L. Xue. Remarkable ductility in metastable refractory high entropy alloys via BCC-FCC/α ″martensitic transformations, 119 (2021) 151902.
[17] H. Su, X. Zhou, S. Zheng, H. Ye, Z. Yang. Atomic-resolution studies on reactions between basal dislocations and {10(1)over-bar2} coherent twin boundaries in a Mg alloy, Journal of Materials Science & Technology 66 (2021) 28-35.
[18] H. Su, X. Zhou, M. Zhang, S. Zheng, H. Ye, Z. Yang. Atomic-resolution studies on reactions of slip dislocations with {101¯1} twin boundaries and local plastic relaxation in a Mg alloy, Acta Materialia 206 (2021) 116622.
[19] K. Ming, S. Jiang, X. Niu, B. Li, X. Bi, S. Zheng. High-temperature strength-coercivity balance in a FeCo-based soft magnetic alloy via magnetic nanoprecipitates, Journal of Materials Science & Technology 81 (2021) 36-42.
[20] X. Ma, L. Yang, X. Shang, M. Li, D. Gao, C. Wu, S. Zheng, B. Zhang, J. Chen, C. Chen, H. Song. Grain boundary defect passivation by in situ formed wide-bandgap lead sulfate for efficient and stable perovskite solar cells, Chemical Engineering Journal 426 (2021).
[21] M. Li, D. Gao, B. Zhang, S. Xu, X. Zhuang, C. Wang, L. Yang, X. Ma, S. Zheng, H. Song, J. Chen, C. Chen. Multifunctional Reductive Molecular Modulator toward Efficient and Stable Perovskite Solar Cells, Solar Rrl 5 (2021).
[22] Q. Jin, X. Shao, S. Zheng, Y. Zhou, B. Zhang, X. Ma. Interfacial dislocations dominated lateral growth of long-period stacking ordered phase in Mg alloys, Journal of Materials Science & Technology 61 (2021) 114-118.
[23] H. Ge, W. Xing, B. Chen, X. Hu, S. Zheng, K. Liu, X. Ma. A new refractory Ni7Nb2 phase identified in Laves eutectic regions by TEM study, Acta Materialia 214 (2021).
[24] C. Chen, S. Zheng, H. Song. Photon management to reduce energy loss in perovskite solar cells, Chemical Society Reviews 50 (2021) 7250-7329.
[25] R. Chang, W. Fang, J. Yan, H. Yu, X. Bai, J. Li, S. Wang, S. Zheng, F. Yin. Microstructure and mechanical properties of CoCrNi-Mo medium entropy alloys: Experiments and first-principle calculations, Journal of Materials Science & Technology 62 (2021) 25-33.
[26] S.J. Zheng, J.Y. Pang, L.X. Yang, W.F. Yang, Y.T. Zhou, Y.Q. Wang, F.X. Yin, X.L. Ma. Void-interface wetting to crossing transition owing to bubble to void transformation, Applied Physics Letters 116 (2020) 093703.
[27] S.S. Youssef, X. Zheng, Y. Ma, S. Huang, M. Qi, J. Qiu, R. Zhang, P. Hua, S. Zheng, J.J.A.M.S. Lei. Characterization of α 2 Precipitates in Ti–6Al and Ti–8Al Binary Alloys: A Comparative Investigation, (2020) 1-9.
[28] T. Xiong, S. Zheng, J. Pang, X. Ma. High-strength and high-ductility AlCoCrFeNi2.1 eutectic high-entropy alloy achieved via precipitation strengthening in a heterogeneous structure, Scripta Materialia 186 (2020) 336-340.
[29] S. Wei, S. Zheng, L. Zhang, Y. Liu, J. Wang, X. Wang, J. Wang. Role of interfacial transition zones in the fracture of Cu/V nanolamellar multilayers, Mater. Res. Lett. 8 (2020) 299-306.
[30] H. Su, X. Zhou, S. Zheng, D. Wu, R. Chen, H. Ye, Z. Yang. Atomic-resolution investigations on formation and evolution of symmetric tilt grain boundaries near the {101¯2} twin orientation in a Mg alloy, Scripta Materialia 187 (2020) 113-118.
[31] X.H. Shao, Q.Q. Jin, Y.T. Zhou, H.J. Yang, S.J. Zheng, B. Zhang, Q. Chen, X.L. Ma. Basal shearing of twinned stacking faults and its effect on mechanical properties in an Mg–Zn–Y alloy with LPSO phase, Materials Science and Engineering: A 779 (2020) 139109.
[32] X. Ma, L. Yang, S. Zheng, Q. Dai, C. Chen, H. Song. All-Inorganic Perovskite Solar Cells: Status and Future, Progress in Chemistry 32 (2020) 1608-1632.
[33] X. Ma, L. Yang, K. Lei, S. Zheng, C. Chen, H. Song. Doping in inorganic perovskite for photovoltaic application, Nano Energy 78 (2020).
[34] Z. Li, X. Qin, Z. Zhu, S. Zheng, H. Li, H. Fu, H. Zhang. Cu-based metallic glass with robust activity and sustainability for wastewater treatment, Journal of Materials Chemistry A 8 (2020) 10855-10864.
[35] K.-X. Lei, J. Wang, C. Chen, S.-Y. Li, S.-W. Wang, S.-J. Zheng, F.-J. Li. Recent progresses on alloy-based anodes for potassium-ion batteries, Rare Metals 39 (2020) 989-1004.
[36] X.F. Kong, N. Gao, I.J. Beyerlein, B.N. Yao, S.J. Zheng, X.L. Ma, D. Legut, T.C. Germann, H.J. Zhang, R.F. Zhang. Interface facilitated transformation of voids directly into stacking fault tetrahedra, Acta Materialia 188 (2020) 623-634.
[37] 熊婷, 郑士建, 马秀良. 高熵合金AlCoCrFeNi2.1的共晶组织及析出相研究, 电子显微学报 39 (2020) 470-475.
[38] H. Ge, Y. Yang, S. Zheng, K. Liu, X. Ma. Creep induced precipitation of the (Cr,Mo)5B3-type boride in γ/γ' eutectic of a Ni-based superalloy, Materials Characterization (2020) 110569.
[39] Q. An, W. Yang, B. Liu, S. Zheng. Interface effects on the properties of Cu–Nb nanolayered composites, Journal of Materials Research (2020) 1-17.
[40] Y.T. Zhou, Y.N. Zan, X.X. Wei, B. Yang, B. Zhang, S.J. Zheng, X.H. Shao, J.H. Dong, X.L. Ma, B.L. Xiao, Q.Z. Wang, Z.Y. Ma. Corrosion onset associated with the reinforcement and secondary phases in B4C-6061Al neutron absorber material in H3BO3 solution, Corrosion Science (2019).
[41] Y. Zhou, Y. Zan, S. Zheng, X. Shao, Q. Jin, B. Zhang, Q. Wang, B. Xiao, X. Ma, Z. Ma. Thermally stable microstructures and mechanical properties of B4C-Al composite with in-situ formed Mg(Al)B-2, Journal of Materials Science & Technology 35 (2019) 1825-1830.
[42] X. Zheng, S. Zheng, J. Wang, Y. Ma, H. Wang, Y. Zhou, X. Shao, B. Zhang, J. Lei, R. Yang, X. Ma. Twinning and sequential kinking in lamellar Ti-6Al-4V alloy, Acta Mater. 181 (2019) 479-490.
[43] X. Zheng, M. Gong, T. Xiong, H. Ge, L. Yang, Y. Zhou, S. Zheng, J. Wang, X. Ma. Deformation induced FCC lamellae and their interaction in commercial pure Ti, Scr. Mater. 162 (2019) 326-330.
[44] B. Zhang, X.X. Wei, B. Wu, J. Wang, X.H. Shao, L.X. Yang, S.J. Zheng, Y.T. Zhou, Q.Q. Jin, E.E. Oguzie, X.L. Ma. Chloride attack on the passive film of duplex alloy, Corrosion Science 154 (2019) 123-128.
[45] 曾帅, 郑士建, 马秀良. 层状金属结构材料原子尺度界面结构与性能 电子显微学报 38 (2019) 569-578.
[46] W. Yang, J. Pang, S. Zheng, J. Wang, X. Zhang, X. Ma. Interface Effects on He Ion Irradiation in Nanostructured Materials, Materials 12 (2019).
[47] W. Yang, I.J. Beyerlein, Q. Jin, H. Ge, T. Xiong, L. Yang, J. Pang, Y. Zhou, X. Shao, B. Zhang, S. Zheng, X. Ma. Strength and ductility of bulk Cu/Nb nanolaminates exposed to extremely high temperatures, Scripta Materialia 166 (2019) 73-77.
[48] L. Yang, H. Ge, J. Zhang, T. Xiong, Q. Jin, Y. Zhou, X. Shao, B. Zhang, Z. Zhu, S. Zheng, X. Ma. High He-ion irradiation resistance of CrMnFeCoNi high-entropy alloy revealed by comparison study with Ni and 304SS, J. Mater. Sci. Technol. 35 (2019) 300-305.
[49] S.Y. Wei, L.F. Zhang, S.J. Zheng, X.P. Wang, J.W. Wang. Deformation-induced interfacial transition zone in Cu/V nanolamellar multilayers, Scripta Materialia 159 (2019) 104-108.
[50] X.H. Shao, Z.Z. Peng, Q.Q. Jin, Y.T. Zhou, B. Zhang, S.J. Zheng, Q. Chen, X.L. Ma. Unravelling the local ring-like atomic pattern of twin boundary in an Mg-Zn-Y alloy, Philosophical Magazine 99 (2019) 306-317.
[51] X.H. Shao, Q.Q. Jin, Y.T. Zhou, H.J. Yang, S.J. Zheng, B. Zhang, Q. Chen, X.L. Ma. Segregation of solute atoms along deformation-induced boundaries in an Mg–Zn–Y alloy containing long period stacking ordered phase, Materialia 6 (2019) 100287.
[52] Z.Z. Peng, Q.Q. Jin, X.H. Shao, Y.T. Zhou, S.J. Zheng, B. Zhang, X.L. Ma. Effect of temperature on deformation mechanisms of the Mg88Co5Y7 alloy during hot compression, Materials Characterization 151 (2019) 553-562.
[53] J. Pang, T. Xiong, X. Wei, Z. Zhu, B. Zhang, Y. Zhou, X. Shao, Q. Jin, S. Zheng, X. Ma. Oxide MnCr2O4 induced pitting corrosion in high entropy alloy CrMnFeCoNi, Materialia 6 (2019) 100275.
[54] Y.P. Lu, H.F. Huang, X.Z. Gao, C.L. Ren, J. Gaob, H.Z. Zhang, S.J. Zheng, Q.Q. Jin, Y.H. Zhao, C.Y. Lu, T.M. Wang, T.J. Li. A promising new class of irradiation tolerant materials: Ti2ZrHfV0.5Mo0.2 high-entropy alloy, Journal of Materials Science & Technology 35 (2019) 369-373.
[55] M. Knezevic, C.M. Poulin, X. Zheng, S. Zheng, I.J. Beyerlein. Strengthening of alloy AA6022-T4 by continuous bending under tension, Materials Science and Engineering: A 758 (2019) 47-55.
[56] Q. Jin, X. Shao, Z. Peng, Y. Zhou, B. Zhang, S. Zheng, X. Ma. Stacking Faults and Growth Twins in Long-Period Stacking-Ordered Structures in Mg-Co-Y Alloys, Advanced Engineering Materials (2019).
[57] R. Guan, Y. Wang, S. Zheng, N. Su, Z. Ji, Z. Liu, Y. An, B. Chen. Fabrication of aluminum matrix composites reinforced with Ni-coated graphene nanosheets, Materials Science and Engineering: A 754 (2019) 437-446.
[58] H.L. Ge, J.D. Liu, S.J. Zheng, Y.T. Zhou, Q.Q. Jin, X.H. Shao, B. Zhang, Y.Z. Zhou, X.L. Ma. Boride-induced dislocation channeling in a single crystal Ni-based superalloy, Materials Letters 235 (2019) 232-235.
[59] S.H. Zhang, X. Zheng, Q.Q. Jin, S.J. Zheng, D. Legut, X.H. Yu, H.Y. Gou, Z.H. Fu, Y.Q. Guo, B.M. Yan, C. Peng, C.Q. Jin, T.C. Germann, R.F. Zhang. Unprecedented plastic flow channel in gamma-B-28 through ultrasoft bonds: A challenge to superhardness, Physical Review Materials 2 (2018).
[60] B. Zhang, X.Y. San, X.X. Wei, B. Wu, S.J. Zheng, Y.T. Zhou, X.H. Shao, Q.Q. Jin, L.X. Yang, E.E. Oguzie, X.L. Ma. Quasi-in-situ observing the growth of native oxide film on the FeCr15Ni15 austenitic alloy by TEM, Corrosion Science 140 (2018) 1-7.
[61] T. Xiong, S.J. Zheng, Y.T. Zhou, J.C. Pang, Q.Q. Jin, H.L. Ge, X.D. Zheng, L.X. Yang, I.J. Beyerlein, X.L. Ma. Enhancing strength and thermal stability of TWIP steels with a heterogeneous structure, Materials Science and Engineering: A 720 (2018) 231-237.
[62] Y.Z. Tian, T. Xiong, S.J. Zheng, Y. Bai, J. Freudenberger, R. Pippan, Z.F. Zhang, N. Tsuji. Ultrafine-grained CuAg7Zr0.05 alloy with fully recrystallized microstructure, Materialia 3 (2018) 162-168.
[63] M.Q. Ou, Y.C. Ma, H.L. Ge, B. Chen, S.J. Zheng, K. Liu. Effect of long-term aging on the microstructure, stress rupture properties and deformation mechanisms of a new cast nickel base superalloy, Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process. 736 (2018) 76-86.
[64] M. Ou, Y. Ma, H. Ge, W. Xing, Y. Zhou, S. Zheng, K. Liu. Microstructure evolution and mechanical properties of a new cast Ni-base superalloy with various Ti contents, Journal of Alloys and Compounds 735 (2018) 193-201.
[65] P. Niu, T. Wu, L. Wen, J. Tan, Y. Yang, S. Zheng, Y. Liang, F. Li, J.T.S. Irvine, G. Liu, X. Ma, H.-M. Cheng. Substitutional Carbon-Modified Anatase TiO2 Decahedral Plates Directly Derived from Titanium Oxalate Crystals via Topotactic Transition, Advanced Materials 30 (2018).
[66] J. Mu, J. Wang, Z. Zhao, Z. Zhu, S. Zheng, Z. Ai, Y. Wang. Regulating kinetics of deformation-induced phase transformation in amorphous alloy composite via tuning nano-scale compositional heterogeneity in crystalline phase, Intermetallics 93 (2018) 72-76.
[67] Z. Miao, X. Wang, M.-C. Tsai, Q. Jin, J. Liang, F. Ma, T. Wang, S. Zheng, B.-J. Hwang, Y. Huang, S. Guo, Q. Li. Atomically Dispersed Fe-N-x/C Electrocatalyst Boosts Oxygen Catalysis via a New Metal-Organic Polymer Supramolecule Strategy, Advanced Energy Materials 8 (2018).
[68] Y. Li, S. Niu, D. Rakov, Y. Wang, M. Cabán-Acevedo, S. Zheng, B. Song, P. Xu. Metal organic framework-derived CoPS/N-doped carbon for efficient electrocatalytic hydrogen evolution, Nanoscale 10 (2018) 7291-7297.
[69] Y. Zhou, S. Zheng, Y. Jiang, T. Zhao, Y. Wang, X. Ma. Atomic structure of the Fe/Fe3C interface with the Isaichev orientation in pearlite, Philosophical Magazine (2017) 1-12.
[70] Y. Zhou, Y. Zan, S. Zheng, Q. Wang, B. Xiao, X. Ma, Z. Ma. Distribution of the microalloying element Cu in B4C-reinforced 6061Al composites, Journal of Alloys and Compounds 728 (2017) 112-117.
[71] L.X. Yang, S.J. Zheng, Y.T. Zhou, J. Zhang, Y.Q. Wang, C.B. Jiang, N.A. Mara, I.J. Beyerlein, X.L. Ma. Effects of He radiation on cavity distribution and hardness of bulk nanolayered Cu-Nb composites, Journal of Nuclear Materials 487 (2017) 311-316.
[72] S. Pathak, N. Velisavljevic, J.K. Baldwin, M. Jain, S. Zheng, N.A. Mara, I.J. Beyerlein. Strong, ductile, and thermally stable bcc-Mg Nanolaminates, Scientific Reports 7 (2017) 8264.
[73] L. Lin, W. Zhou, R. Gao, S. Yao, X. Zhang, W. Xu, S. Zheng, Z. Jiang, Q. Yu, Y.-W. Li, C. Shi, X.-D. Wen, D. Ma. Low-temperature hydrogen production from water and methanol using Pt/α-MoC catalysts, Nature 544 (2017) 80-83.
[74] M. Jahedi, I.J. Beyerlein, M.H. Paydar, S. Zheng, T. Xiong, M. Knezevic. Effects of Pressure and Number of Turns on Microstructural Homogeneity Developed in High-Pressure Double Torsion, Metallurgical and Materials Transactions A 48 (2017) 1249-1263.
[75] Y.T. Zhou, S.J. Zheng, B. Zhang, X.L. Ma. Atomic scale understanding of the interaction between alloying copper and MnS inclusions in stainless steels in NaCl electrolyte, Corrosion Science 111 (2016) 414-421.
[76] S. Zheng, R. Zhang, R. Huang, T. Taniguchi, X. Ma, Y. Ikuhara, I.J. Beyerlein. Structure and energetics of nanotwins in cubic boron nitrides, Applied Physics Letters 109 (2016) 081901.
[77] R.F. Zhang, I.J. Beyerlein, S.J. Zheng, S.H. Zhang, A. Stukowski, T.C. Germann. Manipulating dislocation nucleation and shear resistance of bimetal interfaces by atomic steps, Acta Materialia 113 (2016) 194-205.
[78] E. Xu, Z. Li, J.A. Acosta, N. Li, B. Swartzentruber, S. Zheng, N. Sinitsyn, H. Htoon, J. Wang, S. Zhang. Enhanced thermoelectric properties of topological crystalline insulator PbSnTe nanowires grown by vapor transport, Nano Research 9 (2016) 820-830.
[79] X.H. Shao, S.J. Zheng, D. Chen, Q.Q. Jin, Z.Z. Peng, X.L. Ma. Deformation twinning induced decomposition of lamellar LPSO structure and its re-precipitation in an Mg-Zn-Y alloy, Scientific Reports 6 (2016) 9.
[80] Y.Z. Liu, S.J. Zheng, Y.L. Zhu, H. Wei, X.L. Ma. Microstructural evolution at interfaces of thermal barrier coatings during isothermal oxidation, Journal of the European Ceramic Society 36 (2016) 1765-1774.
[81] Y.T. Zhou, Y.J. Wang, S.J. Zheng, B. Zhang, X.L. Ma. Strain-induced preferential dissolution at the dislocation emergences in MnS: an atomic scale study, Philosophical Magazine 95 (2015) 2365-2375.
[82] S. Zheng, S. Shao, J. Zhang, Y. Wang, M.J. Demkowicz, I.J. Beyerlein, N.A. Mara. Adhesion of voids to bimetal interfaces with non-uniform energies, Scientific Reports 5 (2015) 15428.
[83] C. Sun, S. Zheng, C.C. Wei, Y. Wu, L. Shao, Y. Yang, K.T. Hartwig, S.A. Maloy, S.J. Zinkle, T.R. Allen, H. Wang, X. Zhang. Superior radiation-resistant nanoengineered austenitic 304L stainless steel for applications in extreme radiation environments, Scientific Reports 5 (2015).
[84] Y.Z. Liu, X.B. Hu, S.J. Zheng, Y.L. Zhu, H. Wei, X.L. Ma. Microstructural evolution of the interface between NiCrAlY coating and superalloy during isothermal oxidation, Materials & Design 80 (2015) 63-69.
[85] J.S. Carpenter, T.J. Nizolek, R.J. McCabe, S.J. Zheng, J.E. Scott, S.C. Vogel, N.A. Mara, T.M. Pollock, I.J. Beyerlein. The Suppression of Instabilities via Biphase Interfaces During Bulk Fabrication of Nanograined Zr, Materials Research Letters 3 (2015) 50-57.
[86] J.S. Carpenter, T. Nizolek, R.J. McCabe, M. Knezevic, S.J. Zheng, B.P. Eftink, J.E. Scott, S.C. Vogel, T.M. Pollock, N.A. Mara, I.J. Beyerlein. Bulk texture evolution of nanolamellar Zr–Nb composites processed via accumulative roll bonding, Acta Materialia 92 (2015) 97-108.
[87] Y.T. Zhou, B. Zhang, S.J. Zheng, J. Wang, X.Y. San, X.L. Ma. Atomic-scale decoration for improving the pitting corrosion resistance of austenitic stainless steels, Sci. Rep. 4 (2014) 3604.
[88] S.J. Zheng, J. Wang, J.S. Carpenter, W.M. Mook, P.O. Dickerson, N.A. Mara, I.J. Beyerlein. Plastic instability mechanisms in bimetallic nanolayered composites, Acta Mater. 79 (2014) 282-291.
[89] S.J. Zheng, J.S. Carpenter, R.J. McCabe, I.J. Beyehein, N.A. Mara. Engineering Interface Structures and Thermal Stabilities via SPD Processing in Bulk Nanostructured Metals, Scientific Reports 4 (2014) 4226.
[90] S. Zheng, J.S. Carpenter, J. Wang, N.A. Mara, I.J. Beyerlein. An interface facet driven Rayleigh instability in high-aspect-ratio bimetallic nanolayered composites, Appl. Phys. Lett. 105 (2014) 111901.
[91] M. Jahedi, M.H. Paydar, S. Zheng, I.J. Beyerlein, M. Knezevic. Texture evolution and enhanced grain refinement under high-pressure-double-torsion, Materials Science and Engineering: A 611 (2014) 29-36.
[92] X.B. Hu, Y.B. Xue, S.J. Zheng, Y.L. Zhu, D. Chen, X.L. Ma. Microstructural characteristics of the microphase Y-Ti2SC in nickel-based superalloys, Journal of Alloys and Compounds 611 (2014) 104-110.
[93] W.Z. Han, E.K. Cerreta, N.A. Mara, I.J. Beyerlein, J.S. Carpenter, S.J. Zheng, C.P. Trujillo, P.O. Dickerson, A. Misra. Deformation and failure of shocked bulk Cu–Nb nanolaminates, Acta Materialia 63 (2014) 150-161.
[94] E.G. Fu, Y. Fang, M.J. Zhuo, S.J. Zheng, Z.X. Bi, Y.Q. Wang, M. Tang, X. Ding, W.Z. Han, H.M. Luo, J.K. Baldwin, A. Misra, M. Nastasi. Interface structure of Nb films on single crystal MgO(100) and MgO(1111) substrates, Acta Materialia 64 (2014) 100-112.
[95] C.A.J. Fisher, S. Zheng, A. Kuwabara, H. Moriwake, Y.H. Ikuhara, H. Oki, Y. Ikuhara. Atomic-Level Characterization of Interfaces in LiCoO2, ECS Transactions 58 (2014) 1-11.
[96] E.K. Cerreta, H. Weizhong, N.A. Mara, I.J. Beyerlein, J.S. Carpenter, S.J. Zheng, C.P. Trujillo, P.O. Dickerson, A. Misra. The influence of rolling schedule on the dynamic properties of accumulatively roll bonded nano-layered Cu-Nb, Key Engineering Materials 622-623 (2014) 1031-1040.
[97] J.S. Carpenter, R.J. McCabe, S.J. Zheng, T.A. Wynn, N.A. Mara, I.J. Beyerlein. Processing Parameter Influence on Texture and Microstructural Evolution in Cu-Nb Multilayer Composites Fabricated via Accumulative Roll Bonding, Metall. Mater. Trans. A-Phys. Metall. Mater. Sci. 45A (2014) 2192-2208.
[98] Z.X. Bi, B.P. Uberuaga, L.J. Vernon, J.A. Aguiar, E.G. Fu, S.J. Zheng, S.X. Zhang, Y.Q. Wang, A. Misra, Q.X. Jia. Role of the interface on radiation damage in the SrTiO3/LaAlO3 heterostructure under Ne2+ ion irradiation, Journal of Applied Physics 115 (2014) 124315.
[99] I.J. Beyerlein, J.R. Mayeur, S. Zheng, N.A. Mara, J. Wang, A. Misra. Emergence of stable interfaces under extreme plastic deformation, Proceedings of the National Academy of Sciences of the United States of America 111 (2014) 4386-4390.
[100] I.J. Beyerlein, J.R. Mayeur, R.J. McCabe, S.J. Zheng, J.S. Carpenter, N.A. Mara. Influence of slip and twinning on the crystallographic stability of bimetal interfaces in nanocomposites under deformation, Acta Materialia 72 (2014) 137-147.
[101] M. Ardeljan, M. Knezevic, T. Nizolek, I.J. Beyerlein, S.J. Zheng, J.S. Carpenter, R.J. McCabe, N.A. Mara, T.M. Pollock. A multi-scale model for texture development in Zr/Nb nanolayered composites processed by accumulative roll bonding. in: Beausir B, Bouaziz O, Bouzy E, Grosdidier T, Toth LS, (Eds.). 6th International Conference on Nanomaterials by Severe Plastic Deformation, vol. 63. Iop Publishing Ltd, Bristol, 2014.
[102] S.J. Zheng, X.L. Ma, T. Yamamoto, Y. Ikuhara. Atomistic study of abnormal grain growth structure in BaTiO3 by transmission electron microscopy and scanning transmission electron microscopy, Acta Materialia 61 (2013) 2298-2307.
[103] S.J. Zheng, C.A.J. Fisher, T. Hitosugi, A. Kumatani, S. Shiraki, Y.H. Ikuhara, A. Kuwabara, H. Moriwake, H. Oki, Y. Ikuhara. Antiphase inversion domains in lithium cobaltite thin films deposited on single-crystal sapphire substrates, Acta Materialia 61 (2013) 7671-7678.
[104] S.J. Zheng, I.J. Beyerlein, J.S. Carpenter, K.W. Kang, J. Wang, W.Z. Han, N.A. Mara. High-strength and thermally stable bulk nanolayered composites due to twin-induced interfaces, Nature Communications 4 (2013) 1696.
[105] M.A. Monclús, S.J. Zheng, J.R. Mayeur, I.J. Beyerlein, N.A. Mara, T. Polcar, J. LLorca, J.M. Molina-Aldareguía. Optimum high temperature strength of two-dimensional nanocomposites, APL Materials 1 (2013) 052103.
[106] R. Liu, S.J. Zheng, J.K. Baldwin, M. Kuthuru, N. Mara, A. Antoniou. Synthesis and mechanical behavior of nanoporous nanotwinned copper, Applied Physics Letters 103 (2013) 241907.
[107] Q. Li, P. Xu, B. Zhang, H. Tsai, S.J. Zheng, G. Wu, H.L. Wang. Structure-Dependent Electrocatalytic Properties of Cu2O Nanocrystals for Oxygen Reduction Reaction, Journal of Physical Chemistry C 117 (2013) 13872-13878.
[108] J.S. Carpenter, S.J. Zheng, R.F. Zhang, S.C. Vogel, I.J. Beyerlein, N.A. Mara. Thermal stability of Cu-Nb nanolamellar composites fabricated via accumulative roll bonding, Philosophical Magazine 93 (2013) 718-735.
[109] I.J. Beyerlein, J. Wang, K. Kang, S.J. Zheng, N.A. Mara. Twinnability of bimetal interfaces in nanostructured composites, Materials Research Letters 1 (2013) 89-95.
[110] I.J. Beyerlein, N.A. Mara, J.S. Carpenter, T. Nizolek, W.M. Mook, T.A. Wynn, R.J. McCabe, J.R. Mayeur, K. Kang, S.J. Zheng, J. Wang, T.M. Pollock. Interface-driven microstructure development and ultra high strength of bulk nanostructured Cu-Nb multilayers fabricated by severe plastic deformation, Journal of Materials Research 28 (2013) 1799-1812.
[111] S.J. Zheng, I.J. Beyerlein, J. Wang, J.S. Carpenter, W.Z. Han, N.A. Mara. Deformation twinning mechanisms from bimetal interfaces as revealed by in situ straining in the TEM, Acta Mater. 60 (2012) 5858-5866.
[112] S. Zheng, C.A.J. Fisher, T. Kato, Y. Nagao, H. Ohta, Y. Ikuhara. Domain formation in anatase TiO2 thin films on LaAlO3 substrates, Applied Physics Letters 101 (2012) 052103.
[113] J. Wang, K. Kang, R.F. Zhang, S.J. Zheng, I.J. Beyerlein, N.A. Mara. Structure and Property of Interfaces in ARB Cu/Nb Laminated Composites, Jom 64 (2012) 1208-1217.
[114] H. Ohta, T. Mizuno, S. Zheng, T. Kato, Y. Ikuhara, K. Abe, H. Kumomi, K. Nomura, H. Hosono. Unusually Large Enhancement of Thermopower in an Electric Field Induced Two-Dimensional Electron Gas, Advanced Materials 24 (2012) 740-744.
[115] Y. Makimura, S.J. Zheng, Y. Ikuhara, Y. Ukyo. Microstructural Observation of LiNi0.8Co0.15Al0.05O2 after Charge and Discharge by Scanning Transmission Electron Microscopy, Journal of the Electrochemical Society 159 (2012) A1070-A1073.
[116] K. Kang, J. Wang, S.J. Zheng, I.J. Beyehein. Minimum energy structures of faceted, incoherent interfaces, Journal of Applied Physics 112 (2012) 073501.
[117] B. Cao, T. Shi, S. Zheng, Y.H. Ikuhara, W. Zhou, D. Wood, M. Al-Jassim, Y. Yan. New Polytypoid SnO2(ZnO:Sn)(m) Nanowire: Characterization and Calculation of Its Electronic Structure, Journal of Physical Chemistry C 116 (2012) 5009-5013.
[118] I.J. Beyerlein, N.A. Mara, J. Wang, J.S. Carpenter, S.J. Zheng, W.Z. Han, R.F. Zhang, K. Kang, T. Nizolek, T.M. Pollock. Structure-Property-Functionality of Bimetal Interfaces, Jom 64 (2012) 1192-1207.
[119] S. Zheng, R. Huang, Y. Makimura, Y. Ukyo, C.A.J. Fisher, T. Hirayama, Y. Ikuhara. Microstructural Changes in LiNi(0.8)Co(0.15)Al(0.05)O(2) Positive Electrode Material during the First Cycle, Journal of the Electrochemical Society 158 (2011) A357-A362.
[120] Y.L. Zhu, S.J. Zheng, X.L. Ma, L. Feigl, M. Alexe, D. Hesse, I. Vrejoiu. Microstructural evolution of PbZr(x)Ti(1-x)O(3)/PbZr(y)Ti(1-y)O(3) (n) epitaxial multilayers (x/y=0.2/0.4, 0.4/0.6) - dependence on layer thickness, Philosophical Magazine 90 (2010) 1359-1372.
[121] Y.L. Zhu, S.J. Zheng, D. Chen, X.L. Ma. Microstructure tuning of epitaxial BaTiO(3) (-) (x) thin films grown using laser molecular-beam epitaxy by varying the oxygen pressure, Thin Solid Films 518 (2010) 3669-3673.
[122] S.J. Zheng, Y.J. Wang, B. Zhang, Y.L. Zhu, C. Liu, P. Hu, X.L. Ma. Identification of MnCr(2)O(4) nano-octahedron in catalysing pitting corrosion of austenitic stainless steels, Acta Materialia 58 (2010) 5070-5085.
[123] L. Feigl, S.J. Zheng, B.I. Birajdar, B.J. Rodriguez, Y.L. Zhu, M. Alexe, D. Hesse. Impact of high interface density on ferroelectric and structural properties of PbZr(0.2)Ti(0.8)O(3)/PbZr(0.4)Ti(0.6)O(3) epitaxial multilayers, Journal of Physics D-Applied Physics 42 (2009) 085305.
[124] Z.W. Zhu, S.J. Zheng, H.F. Zhang, B.Z. Ding, Z.Q. Hu, P.K. Liaw, Y.D. Wang, Y. Ren. Plasticity of bulk metallic glasses improved by controlling the solidification condition, Journal of Materials Research 23 (2008) 941-948.
[125] S.J. Zheng, K. Du, X.L. Ma. Abnormal grain growth of BaTiO3 by 2D nucleation and lateral growth, Journal of the European Ceramic Society 28 (2008) 1821-1825.
[126] G. Liu, M. He, K. Jin, G. Yang, H. Lue, K. Zhao, S. Zheng, X. Ma. Fabrication of atomically smooth SrRuO(3) thin films by laser molecular beam epitaxy, Science in China Series G-Physics Mechanics & Astronomy 51 (2008) 745-749.
[127] W.B. Cui, S.J. Zheng, W. Liu, X.L. Ma, F. Yang, Q. Yao, X.G. Zhao, Z.D. Zhang. Anisotropic behavior of exchange coupling in textured Nd(2)Fe(14)B/alpha-Fe multilayer films, Journal of Applied Physics 104 (2008) 053903.
[128] S.J. Zheng, X.L. Ma. Asymmetrical twin boundaries and highly dense antiphase domains in BaNb0.3Ti0.7O3 thin films, Philosophical Magazine 87 (2007) 4421-4431.
[129] S.J. Zheng, K. Du, X.H. Sang, X.L. Ma. TEM and STEM investigation of grain boundaries and second phases in barium titanate, Philosophical Magazine 87 (2007) 5447-5459.
[130] M. Liu, X. Li, J. Lou, S. Zheng, K. Du, N.X. Sun. A modified sol-gel process for multiferroic nanocomposite films, Journal of Applied Physics 102 (2007) 083911.
会议论文目录
[1] Shijian Zheng, Rong Huang, Yoshinari Makimura, Yoshio Ukyo, Tsukasa Hirayama, Yuichi Ikuhara, Microstructural variation of the first-cycled LiNi0.8Co0.15Al0.05O2 cathode materials investigated by STEM and EELS, The 66th Annual Meeting of the Japanese Society of Microscopy, 2010, Nagoya, Japan.
[2] Shijian Zheng1, Craig A. J. Fisher1, Taro Hitosugi2, Yumi H. Ikuhara1, Hiroki Moriwake1, Hideki Oki3 and Yuichi Ikuhara1,2,4 Antiphase domains in LiCoO2 thin films originating from sapphire (0001) substrate, The 67th Annual Meeting of the Japanese Society of Microscopy, 2011, Fukuoka, Japan.
[3] Shijian Zheng; Irene J. Beyerlein; Jian Wang; John S. Carpenter; Weizhong Han; Robert M. Dickerson; Nathan A. Mara; Deformation twinning mechanisms from bi-metal interfaces as revealed by in-situ TEM, TMS 2012, Orlando.
[4] S.J. Zheng, J. Wang, R.M. Dickerson, I.J. Beyerlein, and N.A. Mara, In-situ TEM study of deformation twinning in roll-bonded Cu/Nb nanolamellar metallic composites, Microscopy & Microanalysis 2012 Phoenix.
[5] Shijian Zheng; William M. Mook; John S. Carpenter; Keonwook Kang Robert M. Dickerson; Jian Wang; Irene J. Beyerlein; Nathan A. Mara, Interface effects on deformation twinning and shear banding, TMS 2013, San Antonio.
[6] Shijian Zheng, Irene J. Beyerlein, John S. Carpenter, Keonwook Kang, Jian Wang, Weizhong Han, Robert M. Dickerson, Nathan A. Mara, High strength and thermally stable bulk nanolayered composites due to twin-induced interfaces, TMS 2013, San Antonio.
[7] Shijian Zheng; John S. Carpenter; Rodney J. McCabe, Irene J. Beyerlein; Nathan A. Mara, Tuning interfaces and properties of bulk metallic nanolamellar composites, 2013 MRS Fall Meeting & Exhibit, Boston.
[8] Shijian Zheng; Jian Wang; John S. Carpenter; William M. Mook; Patricia O. Dickerson; Irene J. Beyerlein; Nathan A. Mara, Interface stabilities in nanolamellar composites, TMS 2014, San Diego.
[9] Shijian Zheng; John S. Carpenter; Rodney J. McCabe; Irene J. Beyerlein; Nathan A. Mara, Tuning interfaces in Cu-Nb nanolamellar composites by strain path changes, TMS 2014, San Diego.
[10] 郑士建，John S. Carpenter; Jian Wang; Irene J. Beyerlein; Nathan A. Mara, 高强度、高热稳定性块体纳米层状复合金属材料中的界面效应, 2014全国电镜年会，广西南宁，邀请报告。
[11] 郑士建，块体纳米层状金属复合材料的制备及界面效应研究，2015国际新材料发展趋势论坛，上海，邀请报告。
[12] 郑士建，锂离子电池阳极材料在充放电过程中的结构演化，2015全国电镜年会，四川成都，邀请报告。
[13] 郑士建，层状金属材料中的界面效应，2015全国电镜年会，四川成都，邀请报告。
[14] Shijian Zheng, Jian Wang, John S. Carpenter, Nathan A. Mara, and Irene J. Beyerlein，Interface Dominated Plastic Instability Mechanisms in Bimetallic Nanolayered Composites, 2016 Plasticity, Damage & Fracture, Hawaii, USA, invited talk.
[15] 郑士建，金属结构材料中的界面效应，2016国际新材料发展趋势论坛，南京，邀请报告。
[16] 郑士建，氦泡与界面的交互作用，2016全国电镜年会，天津，邀请报告。
[17] 郑士建，金属结构材料中的界面效应，2016扫描透射电子显微镜及相关分析技术研讨会，南京，邀请报告。
[18] 郑士建，透射电子显微学进展及其在材料科学中的应用，2017青年学者前沿科学论坛，南方科技大学，深圳，3月30日-4月1日，邀请报告。
[19] 郑士建，材料界面效应的透射电子显微学研究，2017扫描透射电子显微镜及相关分析技术研讨会，重庆大学，重庆，4月13日-4月15日，邀请报告。
[20] 郑士建，块体金属材料界面的辐照损伤机理研究，2017年材料大会，核材料分会，银川，7月8日-7月13日，邀请报告。
[21] 郑士建，层状材料中的界面效应，第十届郭可信暑期学术研讨班暨第十届微纳尺度材料性能国际研讨会，西安交通大学，西安，5月31日-6月2日，邀请报告。
[22] 郑士建，材料中的界面效应，2017西北五省电镜会，青海大学，西宁，6月28日-6月30日，邀请报告。
[23] 郑士建，层状金属结构材料中的界面效应，2018第七届国家自然科学基金委员会工程与材料科学部金属材料青年论坛，上海交通大学，上海，1月8日-9日，主旨报告。
[24] Shijian Zheng, Interface effects of nanolayered metallic composites，The 3rd International Conference on Microstructure and Property of Materials, 25th-29th May 2018, Hanzhou, China, Invited talk.
[25] 郑士建，金属结构材料中的界面效应，中国有色金属学会2018青年科技论坛，8月21-23日，长春，邀请报告。
[26] 郑士建，层状材料中的界面效应，2018全国电镜年会，成都，邀请报告(分会主席)。
[27] 郑士建，层状双相Ti6Al4V中界面主导的孪晶变形，2018全国电镜年会，成都，邀请报告(分会主席)。
[28] Shijian Zheng，Interface effects on nanolayered metallic composites, International Microscopy Congress, Sydney Sep 9-14 2018, orial presentation。
[29] 郑士建，金属结构材料中原子尺度界面效应，2018新材料国际发展趋势高层论坛，9月16-18日，沈阳，邀请报告。
[30] 郑士建，层状材料中原子尺度界面结构与性能，中国科协第 366 次青年科学家论坛材料界面科学专门论坛，2018年11月2-4日，长沙，邀请报告(会议主席)。
[31] 郑士建，金属结构材料中的界面效应，2019扫描透射电子显微镜及相关技术研讨会，天津，2019年5月16-19日，邀请报告。
[32] 郑士建，金属结构材料中原子尺度界面结构与性能，中国材料大会2019，成都，2019年7月10-14日，分会邀请报告。
[33] 郑士建，界面结构设计与性能调控，2019西北五省电镜会，兰州，2019年7月12-14日，邀请报告。
[34] 郑士建，层状金属复合材料原子尺度界面结构与性能，第十二届有色金属学术年会暨展览会，重庆，2019年9月19-21日，邀请报告。[35] 郑士建，金属结构材料原子尺度界面结构与性能，2019全国电子显微镜学术年会，合肥，2019年10月15-19日，邀请报告。
[36] 郑士建，Interface effects on mechanical properties of nanolayered metallic composites，第十八届北京分析测试学术报告会暨展览会(BCEIA 2019)，北京，2019年10月23-26日，邀请报告。
[37] 郑士建，近使役条件下原子尺度界面结构与性能，第二届先进结构材料实验设计与计算模拟论坛，第二届先进结构材料实验设计与计算模拟论坛，成都，2019年11月8-10日，邀请报告(会议主席)。
[38] 郑士建，近使役条件下金属材料原子尺度界面结构与性能，第七届海内外中华青年材料科学技术研讨会暨第十七届全国青年材料科学技术研讨会，上海，2019年11月22-25日，邀请报告。
[39] 郑士建，近使役条件下原子尺度界面结构与性能，第八届中国-澳大利亚教育、科学与技术高端论坛，天津，2019年12月26-29日，邀请报告（会议主席）。
[40] Shijian Zheng, Jian Wang, Twinning and sequential kinking in lamellar Ti6Al4V alloy, International Congress of Plasticity, Damage & Fracture’2020, Rivera Maya, Mexico, Jan 3-9 2020, invited talk.
[41]郑士建，双相钛合金界面结构与微观变形机理，全国电子显微学学术年会，2020年11月21-25日，成都，邀请报告。
[42] 郑士建，金属材料界面效应的原子尺度研究，第五届材料微结构与性能，2021年4月25-27日，杭州，邀请报告。
[43] 郑士建，金属材料使役行为原子尺度研究，第六期疲劳学术专题研讨会，2021年5月28-30日，天津， 邀请报告。
[44] 郑士建，材料服役行为的原子尺度研究，中国有色金属学会第十三届学术年会，2021年6月25-27日，兰州，邀请报告。
[45] 郑士建，材料使役行为的原子尺度研究，中国材料大会2021，2021年7月8-12日，厦门，邀请报告（会议主席）。
[46] 郑士建，材料使役行为原子尺度研究，第十三届郭可信电子显微学与晶体学暑期学习班暨第四届先进结构材料国际研讨会，2021年7月14-17日，重庆，邀请报告。
[47] 郑士建，材料使役行为的原子尺度研究，2021有色金属新材料大会，2021年7月30-8月1日，南宁，邀请报告。
[48] 郑士建，材料辐照损伤的电子显微学研究，第四届中国核学会锕系物理与化学分会学术交流会，2021年9月24-25日，绵阳，邀请报告。
[49] 郑士建，近使役环境下高温合金中析出相的强韧化机理，2021全国电子显微学学术年会，2021年10月14-18日，东莞，邀请报告。
[50] 郑士建，Ti6Al4V孪晶及其与β相交互作用机理，2021全国电子显微学学术年会，2021年10月14-18日，东莞，邀请报告。
[51] 郑士建，金属材料使役行为原子尺度研究，2021新材料国际发展趋势高层论坛-C材料服役行为，2021年10月16-18日，宁波，邀请报告。
